Helping you design success!
FoamKleen delivers a high-pressure stream of dry content foam to the hard to reach walls and ceilings of industrial plants and coal facilities. After it’s applied, the FoamKleen agent travels down the wall from the ceiling, girders and framework and will attract dust like a magnet. It then carries the dust deposits directly to the floor. After the foam dissipates, it is simply swept away. FoamKleen is ideal for cleaning any kind of coal dust, especially PRB coal from western regions, which can be very explosive. Routine cleaning around volatile coal dust areas is an important safety precaution and provides peace of mind to your company and employees. From a practical standpoint, our FoamKleen agent minimizes the amount of moisture that enters storage areas, which affects the BTU value of the coal itself
FoamKleen offers remarkable spray range. The system comes with an 6’ spray wand and a 75’ discharge line. Assuming the unit is positioned in the middle of the cleaning area, 200 lineal feet of area is reached without moving the unit. Should the unit need to be re-positioned, the unit is very portable on pneumatic wheels. No adjustments need to be made on the injection pump and all the settings remain set. The electric, water, and air supply lines can be customized to the customer’s requirements. When finished for the day, we recommend (as a good housekeeping practice) to simply flush the injection pump with air and water.
The FoamKleen unit includes a five gallon chemical concentrate tank, an explosive-proof chemical injection pump and a pneumatic rubber wheeled stand. The pump is powered by 110 volt AC current, requires a water supply minimum of 3 gpm @ 45 psi and a minimum of 50 psi air pressure (20 cfm) to achieve proper spraying range. A 110 volt explosion proof male plug, a 1/4” female NPT air connection and a 3/4” female NPT water connection are required on location.
Copyright © 2009-2020 Growmore Advisors - All Rights Reserved.